The composition, performance and application are different<&list>The composition is different: enamels are pigments and resins, paints are resins, fillers, pigments, and some solvents and additives are added. <&list>The performance is different: enamel has good high temperature resistance, adhesion, and better gloss, and can withstand climate change. The paint is soluble in kerosene, gasoline, etc., but insoluble in water. It has a good decorative effect and is rich in colors. <&list>Different uses: Enamel paint is widely used to paint on vehicles or metals, and paint is generally painted on walls, furniture, vehicles, steel frames, etc.
There are many types of paints on the market, such as: enamel, paint, latex paint, varnish, etc. Different types have different properties and application ranges. So what is the difference between enamel and paint?
1. What is the difference between enamel and paint
1. Different ingredients: The main components of enamel are pigments and resins, and some enamel may also add some phenolic formaldehyde. There are many main components of paint, such as: resins, fillers, pigments, and some solvents, additives, etc. are added.
2. Different properties: enamel not only has good high temperature resistance and adhesion, but also has better gloss, and can withstand strong climate changes. The paint is soluble in kerosene, gasoline, etc., but not water-soluble, and has a good decorative effect, and the variety of colors is relatively rich.
3. Different uses: Enamel paint can be added with some suitable pigments according to construction requirements, and is widely used to paint on vehicles or metals. Paint is generally painted on walls, furniture, vehicles, steel frames, etc., not only can play the role of waterproof, oil proof, anti-corrosion, etc., but also has a very good decorative effect.
Second, what aspects should be paid attention to in the construction of enamel paint
1. During the construction process of enamel paint, enamel paint generally needs to be applied more than two times, and sanding should be carried out before each construction, the purpose is to increase the adhesion between each layer of paint film, if the construction personnel are not serious If sanding, it will cause the adhesion of the next layer of paint film to decrease.
2. During the construction process, it is necessary to follow the correct construction process to carry out the construction, so as to avoid affecting the construction effect and service life of the stone paint. Under normal circumstances, the substrate should be treated first, then the wall surface should be sealed, then putty should be applied, primer should be applied, leveling should be carried out, and topcoat should be applied at last.
Post time: Dec-23-2022
